.jpg)
Vertical Machining Centers
Technical specifications
| Modell | VC 0852 | VC 1052 | VC 1200 |
| Travels | |||
| X-Axis (mm) | 860 | 1.060 | 1.270 |
| Y-Axis (mm) | 520 | 660 | |
| Z-Axis (mm) | 610 | ||
| Table | |||
| Table working surface W x D (mm) | 1.000 x 520 | 1.160 x 520 | 1.500 x 660 |
| Load max. (uniform distribution) (kg) | 500 | 650 | 1.360 |
| Distance from spindle nose to table (mm) | 115 - 725 | 150 - 760 | |
| T-Slots (DIN 650) | 5 x 18 x 100 | 6 x 18 x 100 | |
| Spindle | |||
| Spindle Taper | SK40 - BigPlus / BBT40 | ||
| Type | Riemen | In-Line | |
| Power S1/S6 (kW) | 7,5 / 11,5 | 10 / 14 | |
| Torque S1/S6 (Nm) | 47,8 / 73,4 | 63,7 / 89,4 | |
| Spindle Speed (rpm) | 12.000 | 15.000 | |
| Feed Rate | |||
| Rapid Traverse X/Y/Z-Axis (m/min) | 36 / 36 / 24 | ||
| Cutting Feed Rate X/Y/Z-Axis (mm/min) | 12 | ||
| ATC & Magazine | |||
| ATC Type | Doppelgreifer | ||
| Magazine Capacity | 30 | ||
| Maximum Tool Diameter (mm) full / next pocket empty | 75 | 80 | |
| With Empty Pockets (mm) | 150 | 125 | |
| Maximum Tool Length (mm) | 300 | ||
| Maximum Tool Weight (kg) | 7 | ||
| Space & System Requirements | |||
| Maximum Floor Spade (mm) W x L x H | 3.870 x 3.750 x 3.100 | 5.280 x 3.470 x 3.100 | |
| Machine Net Weight (kg) | 5.250 | 5.500 | 9.000 |
| Electrical Power Consumption (kVA / A) | 30 | 35 | |
| Air Requirements (bar) | 6 | ||
| Modell | VC 0852 | VC 1052 | VC 1200 |
Accessories
| Standard | Optional | ||
|---|---|---|---|
| Heidenhain Control TNC 640 | VC 0852/ VC 1052: Direct drive spindle 15.000 1/min. SK40BigPlus | ||
| Belt drive spindle 12.000 1 /min. SK40BigPlus | Coolant through spindle (CTS 30 bar) | ||
| Coolant wash-down system | Rotary table (4th / 5th axis) | ||
| Spindle chiller | Part probe measurement system | ||
| Full enclosure | Tool probe measurement system | ||
| Programmable airblow machining | Programmable airblow through spindle machining | ||
| Oil Skimmer | Oil mist device | ||
| Wash-down gun and air gun | Oil mist collector | ||
| Chip conveyor and cart | Scraper type conveyor instead of chain type conveyor | ||
| Manual pulse generator (MPG) | Production package Knoll | ||
| Ethernet interface | Bypass Filter |
General Infos
High rigidity and high-precision mechanical structure
- Main mechanical structures, such as: base, column, saddle, etc., are made of Meehanite casting iron with the process of heat treatment to release the residual stress to ensure every actual miniature movement and to maintain a long-lasting accuracy.
- The design with 3-axis roller-type high-precision linear guide-ways acquires a quick response in acceleration and deceleration and gets the rapid traverse up to 32 m/min.
No-counterbalance design on headstock
- Z-axis linear guideway with 4 blocks ensures good accuracy in long-term operation and long service hours.
High-precision and high-performance spindle
- Embedded optional automatic thermal compensation appliance can effectively refrain from the thermal deformation and surely guarantee the accuracy.
- The cooling system on the spindle makes sure the temperature stability in spindle operation and restrains from the thermal deformation on the spindle to optimize the machining accuracy.
Chip flushing function and oli-skimmed design
The inclined-plane design on the chassis, together with the flushing coolant system on both rear sides, makes chip removed effective.
Oil-skimmed design – the water tank with oil skimmer makes the service life of coolant longer.
Oil-skimmed design – the water tank with oil skimmer makes the service life of coolant longer.
Automatic Tool change
- Tool magazine with double gripper 30 seats
Heidenhain Control TNC 640
- Our Takumi Machining Centers are equipped with the latest Heidenhein TNC control.