de
en
H6 H 7 H10

H 6/ H 7 / H 10

Compact Design

Technical specifications

Modell H6 H 7 H10
Travels
X-Axis (mm) 550 mm7501.020
Y-Axis (mm) 600 mm600700
Z-Axis (mm) 350 mm500
Table
Distance from spindle nose to table (mm) 120 - 470 mm150 - 650180 - 680
Distance between columns (mm) 650 mm8501.080
Table working surface W x D (mm) 600 x 600 mm810 x 6201.050 x 700
Load max. (uniform distribution) (kg) 500 kg500800
T-Slots (DIN 650) 6 x 14 mm x 100 mm5 x 18 x 1256 x 18 x 125
Spindle
Spindle Taper HSK40-EBBT40 / HSK63-A / SK40 - BigPlus
Type MotorspindelIn-Line
Power S1/S6 (kW) 12 / 1510 / 14
Torque S1/S6 (Nm) 11 / 13,863,7 / 89,4
Spindle Speed (rpm) 36.00015.000
Feed Rate
Rapid Traverse X/Y/Z-Axis (m/min) 30 / 30 / 3032 / 32 / 32
Cutting Feed Rate X/Y/Z-Axis (mm/min) 12.00020
ATC & Magazine
ATC Type HSK40-E Pick-upDoppelgreifer
Magazine Capacity 202430
Maximum Tool Diameter (mm) full / next pocket empty 75 mm7575 / 120
With Empty Pockets (mm) 100 mm120
Maximum Tool Length (mm) 200 mm300
Maximum Tool Weight (kg) 1,5 kg7
Space & System Requirements
Air Requirements (bar) 6 bar / 0,15 cbm/min6
Electrical Power Consumption (kVA / A) 30 kVA / 50 A / 400 V50 / 72
Machine Net Weight (kg) 5.500 kg7.0009.100
Maximum Floor Spade (mm) W x L x H 3.220 x 4.110 x 2.655 mm3.530 x 4.220 x 2.7604.520 x 4.290 x 2.830
Modell H6 H 7 H10

Accessories

Standard Optional
H6: Heidenhain Control TNC 620 Manual pluse generator (MPG)
H7 / H10: Heidenhain iTNC 640 Control Rotary table (4th/5th axis)
Spindle thermal compensation system Linear Scales
Chip flushing Touch probe for tool measurement
Spindle cooling Part probe measurement system
Full enclosure Oil mist device
Programmable airblow machining Oil mist collector
Oil mist device Scraper type conveyor
Wash down gun and air gun Producation package Knoll
Chip conveyor and cart Bypass Filter
24T arm type ATC (H7) Rotoclear
H7/ H10: Ethernet interface H6: Built-in spindle HSK40-E2 mit 42.000 rpm
H7/ H10: 15,000 rpm, CAT/BT40, inline spindle H7 / H10: Ballscrew cooling system
H7 / H10: Coolant through spindle (CTS 30bar) H7 / H10: Ballscrew cooling system

General Infos

High-rigidity and high-precision mechanical structure

  • Main mechanical structures, such as: base, column, saddle, etc., are made of Meehanite casting iron with the process of heat treatment to release the residual stress to ensure every actual miniature movement and to maintain a long-lasting accuracy.
  • Box-shaped structural design on beam, together with ladder-like layout of linear guideway makes the combining span of saddle wider and assures a powerful and stable machining capability on the spindle.
  •  The design with 3-axis roller-type high-precision linear guide-ways acquires a quick response in acceleration and deceleration and gets the rapid traverse up to 32 m/min.
  •  3-axis ballscrews, being pre-stretched, can effectively refrain from the thermal deformation and surely guarantee the precise positioning accuracy and repeatability accuracy.
High-rigidity and high-precision mechanical structure

No-counterbalance design on headstock

  • The no-counterweight structural design on headstock is without stagnant phenomenon caused by inertia and no vibration resulted from the counterweight, but with the agile, quick and stable response in feed.
  • Z-axis linear guideway with 6 blocks ensures good accuracy in long-term operation and long service hours.
No-counterbalance design on headstock

High-precision and high-performance spindle

  • Embedded automatic thermal compensation appliance can effectively refrain from the thermal deformation and surely guarantee the accuracy.
  • The cooling system on the spindle makes sure the temperature stability in spindle operation and restrains from the thermal deformation on the spindle to optimize the machining accuracy.
High-precision and high-performance spindle

Chip flushing function and oil-skimmed design

  • The inclined-plane design on the chassis, together with the flushing coolant system on both rear sides, makes chip removed effective.
  • Oil-skimmed design – the water tank with oil skimmer makes the service life of coolant longer.
 

Automatic Tool change

  • Tool magazine with tool change arm 20 seats, 50 seats optional
 

Heidenhain Control TNC 640

  • Our Takumi  Machining Centers are equipped with the latest Heidenhein TNC control.
Heidenhain Control TNC 640

Downloads/Links

We are here for you.

Use our contact form, send an email or just call us!
Start inquiry